Subscribe
Tutorial search

Pro/ENGINEER Tutorials


We hope that you will enjoy our Pro/ENGINEER tutorials. Feel free to contact us if you would like to be a tutorial hero and contribute your own Pro/ENGINEER tutorial to our site. Thank you !

Sort by:
Creating A Wire Whisk
Creating A Wire Whisk
Learn how to create a parametrically driven wire whisk.
Difficulty:
Starting A Part Model
Starting A Part Model
See tip link for description.
Difficulty:
Drive Geometry With 2d Graphs
Drive Geometry With 2d Graphs
Many times a feature`s design intent is driven by graphical data. For example, a cam profile may be described by a graph of displacement vs. rotation angle. The example in this tutorial will drive a translation along an axis as a part is rotated. The graph and part are shown below.
Difficulty:
Lesson 02 - Overview Example
Lesson 02 - Overview Example
Lesson Objective: In this lesson, we will go through an example that demonstrates the basic steps to creating a surface from four boundary curves using the style feature.
Difficulty:
Top Down Design - Using A Start Part - Demo
Top Down Design - Using A Start Part - Demo
Assemble an empty component to hold the heater top housing, and set up the display of the layers. More...
Difficulty:
Blend Feature
Blend Feature
In this tutorial, we will learn about the Blend Feature.
Difficulty:
Ask The Plm: Pro/engineer Behavioral Modeling Technical Tips
Ask The Plm: Pro/engineer Behavioral Modeling Technical Tips
Topics include how BMX will work in Pro/E Wildfire and with Mechanism Design...
Difficulty:
Using A Template - Demonstration Video
Using A Template - Demonstration Video
Click the icon to play an overview of the Using a Template Demonstration. Once the video has finished playing, close the window containing the video, and return here to complete the hands-on exercise. Note that viewing the recorded demonstration is optional.
Difficulty:
Excellent Interactive Tutorial! - Cadtrain's Primer For Pro/engineer Wildfire 2.0
Excellent Interactive Tutorial! - Cadtrain's Primer For Pro/engineer Wildfire 2.0
This 4 hour introduction to Pro/ENGINEER Wildfire is available using your Internet connection for FREE. Welcome to the Primer for Pro/ENGINEER Wildfire. This Primer is designed to teach you some of the functions in Pro/ENGINEER Wildfire which make it the most widely used, powerful, integrated manufacturing system in the world.
Difficulty:
Isdx Technical Tips
Isdx Technical Tips
Learn how to enhance your surfacing capabilities with a freeform modeling environment that enables you to get the exact complex shape you`re looking for.
Difficulty:
Advanced Features > Flatten Form Features > Video Lecture
Advanced Features > Flatten Form Features > Video Lecture
Form features are used to create shapes which are stamped into sheetmetal. You can control the shape of the form as either a Punch or a Die. The Flatten Form feature is used to flatten the form feature for display in the part`s flat state.
Difficulty:
Basic Modeling Techniques Tutorial 1: Extrusions, Sketching, And Cuts
Basic Modeling Techniques Tutorial 1: Extrusions, Sketching, And Cuts
Extrusions are one of the most basic ways to design a part in Pro/E, and sketching is an important part of the design process. In this section, you will learn basic operations by creating a simple part using an extruded protrusion. You will then modify the part using a cutting operation.
Difficulty:
Tolerances
Tolerances
PRO/Engineer is quite unusual as a solid modeller in that it is capable of recording and using tolerance information. The addition of tolerances and their use within such operations as weight calculation and part interference are described.
Difficulty:
Lesson 46 - Drawing Mode - Show Axes & Gtol Datums
Lesson 46 - Drawing Mode - Show Axes & Gtol Datums
Lesson Objective: In this lesson, we will learn how to show axes on our drawing view, and also how to show GTOL Datums. We will have a general discussion on the Show/Erase tool as well.
Difficulty:
The Industrial Designer`s Toolset (how To Video)
The Industrial Designer`s Toolset (how To Video)
An overview of PTC Products related to Surfacing and Styling including demonstrations of these PTC Products and capabilities. (Free registration and login required)
Difficulty:
Total Tutorials in Category: 704