Subscribe
Tutorial search

Pro/ENGINEER Tutorials


We hope that you will enjoy our Pro/ENGINEER tutorials. Feel free to contact us if you would like to be a tutorial hero and contribute your own Pro/ENGINEER tutorial to our site. Thank you !

Sort by:
Lesson 05 - Snapshots
Lesson 05 - Snapshots
Lesson Objective: In this lesson, we will learn how to create snapshots of our assembly at different configurations, and how to use those snapshots for drawings.
Difficulty:
Lesson 03 - Active Plane
Lesson 03 - Active Plane
Lesson Objective: In this lesson, we will learn about the Active plane, both how to use it and how to create it, as well as some of the preferences for the grid on the plane.
Difficulty:
Pro/engineer Wildfire 2.0 Mechanism Lesson 06 - Servo Motors
Pro/engineer Wildfire 2.0 Mechanism Lesson 06 - Servo Motors
Lesson Objective: In this lesson, we will learn how to create servo motors, and run a simple animation and play back the results.
Difficulty:
Pro/engineer Wildfire 2.0 Fundamentals Lesson 08 - Datums Part 1
Pro/engineer Wildfire 2.0 Fundamentals Lesson 08 - Datums Part 1
Lesson Objective: In this lesson, we will learn about Datum Planes, Datum Axes, Datum Points, and Datum Coordinate Systems.
Difficulty:
Lesson 11 - Surface Operations
Lesson 11 - Surface Operations
Lesson Objective: In this lesson, we will learn about trimming surfaces, meshing surfaces, displaying entities, style parameters and repeating a style command.
Difficulty:
Lesson 10 - Curve Operations
Lesson 10 - Curve Operations
Lesson Objective: In this lesson, we will learn how to make multiple curve edits, copy curves, offset curves, and importing datum curves.
Difficulty:
Lesson 20 - Variable Section Sweeps
Lesson 20 - Variable Section Sweeps
A variable section sweep is an advanced sweep feature that, instead of maintaining a constant section shape and size along the length of the trajectory, is varying along the trajectory by specifying additional trajectories that push or pull the section as it goes.
Difficulty:
Lesson 13 - Bearing Connection
Lesson 13 - Bearing Connection
Lesson Objective: In this lesson, we will learn about the bearing connection.
Difficulty:
Lesson 22 - General Connection
Lesson 22 - General Connection
A general connection is one in which no specific degree of freedom is explicitly set. You will be able to fix degrees of freedom one-by-one with this connection by using regular placement constraints, such as Align, Mate, etc.
Difficulty:
Lesson 16 - Hole Feature
Lesson 16 - Hole Feature
Lesson Objective: In this lesson, we will learn about the Hole Feature.
Difficulty:
Lesson 17 - Gravity
Lesson 17 - Gravity
Lesson Objective: In this lesson, we will learn about adding gravity to our mechanism models.
Difficulty:
Hole Feature
Hole Feature
In this tutorial, we will learn about the Hole Feature.
Difficulty:
Lesson 48 - Drawing Mode - Broken & Partial Views
Lesson 48 - Drawing Mode - Broken & Partial Views
Broken views are used to shorten a view of an elongated feature/model. Typically, the elongated model does not vary in features from one end to the other, and therefore, you can remove the middle of this model, and not lose any detail.
Difficulty:
Adding A Foreign Document Data Type Into Pro/intralink 3.0 And Viewing The Document In The Productvi
Adding A Foreign Document Data Type Into Pro/intralink 3.0 And Viewing The Document In The Productvi
This procedure documents the steps required to add foreign document data types into Pro/INTRALINK, relating them to a Pro/ENGINEER part or assembly, and then displaying them in the ProductView plugin client. It assumes Pro/INTRALINK 3.0, the ProductView client, and the Graphics Server are all installed and functioning correctly. It also assumes a basic working knowledge of Pro/INTRALINK.
Difficulty:
Boundary Blended Surface
Boundary Blended Surface
In this tutorial, we will learn about the Boundary Blended Surface tool. None of the tools that we have used so far would help you take boundary curves to define a surface, and internal curves to control the shape across the boundaries. This is what a boundary blended surface is all about.
Difficulty:
Total Tutorials in Category: 704