Subscribe
Tutorial search

Pro/ENGINEER Tutorials


We hope that you will enjoy our Pro/ENGINEER tutorials. Feel free to contact us if you would like to be a tutorial hero and contribute your own Pro/ENGINEER tutorial to our site. Thank you !

Sort by:
Pro/engineer Wildfire 3.0 Overview
Pro/engineer Wildfire 3.0 Overview
Creating pin and fitting, making an assembly using these parts and creating a drawing of the assembly.
Difficulty:
Driving Complex Models With 2d Curves
Driving Complex Models With 2d Curves
Pro/ENGINEER tutorial shows how you can use 2D curves for more than just shaping and trimming surfaces...
Difficulty:
Lesson 21 - 6dof Connection
Lesson 21 - 6dof Connection
Lesson Objective: In this lesson, we will learn about the 6DOF connection type.
Difficulty:
Getting Your Bearings
Getting Your Bearings
Teaches the new user how to start Pro/ENGINEER, how to manipulate the model and an explanation of the screen layout...
Difficulty:
And Now, Our Feature Presentation
And Now, Our Feature Presentation
A series of brief video clips demonstrating Pro/ENGINEER Wildfire`s new functionalities.
Difficulty:
Concept Aircraft
Concept Aircraft
This tutorial creates the individual aircraft components, drawn to scale in metres. The components will be assembled to make the basic shape of a concept aircraft. The style of the tutorial assumes the user has gained a basic understanding of single part modelling.
Difficulty:
Lesson 28 - Offset Tool
Lesson 28 - Offset Tool
The offset tool is a very versatile tool. It can be used to create a new quilt surface by offsetting an existing solid or quilt surface. It can also be used to replace a solid surface with quilt surface. Another use for this tool is to create an emboss on a solid or quilt surface by a defined shape. The last use of this tool that we will demonstrate is the ability to offset curves.
Difficulty:
Using 3-d Notes With Process Steps
Using 3-d Notes With Process Steps
-D Notes are displayed and cleared from the screen automatically when the step to which the note belongs is displayed or cleared. When a step is active or is being used in a drawing step, a 3-D note created for the step will be displayed. When the step is no longer displayed, the note also is not displayed. Creation of 3-D notes is the default when creating a note in a step.
Difficulty:
Using The Style Feature (interactive Surface Design Extension) In Wildfire 2.0
Using The Style Feature (interactive Surface Design Extension) In Wildfire 2.0
Free Login Required. When designing aesthetic surfaces, it is often desirable not to have to enter dimensions for curves creating the surfaces. In cases like this, Pro/ENGINEER Wildfire Style feature is the perfect fit for users.
Difficulty:
Datums Part 2
Datums Part 2
In this lesson, we will learn about Datum Curves.
Difficulty:
Modifying A Design -using The Browser
Modifying A Design -using The Browser
The browser function will be used to modify some aspects of the design created in Module 1.
Difficulty:
Troubleshooting Plotter Output In Pro/engineer
Troubleshooting Plotter Output In Pro/engineer
troubleshooting shaded EPS files and clipped plotted output, PTC Express, March 2006
Difficulty:
Lesson 30 - Thicken Tool
Lesson 30 - Thicken Tool
The Thicken tool is used to create a thin-walled protrusion or cut by adding thickness about a quilt surface.
Difficulty:
Text > Parameters & Notes > Demo (with Video)
Text > Parameters & Notes > Demo (with Video)
Add the required annotation to the provided drawing.
Difficulty:
Fill Tool
Fill Tool
In this tutorial, we will learn about the Fill Tool.
Difficulty:
Total Tutorials in Category: 704