Subscribe
Tutorial search

Pro/ENGINEER Tutorials


We hope that you will enjoy our Pro/ENGINEER tutorials. Feel free to contact us if you would like to be a tutorial hero and contribute your own Pro/ENGINEER tutorial to our site. Thank you !

Sort by:
Using Warp's Sculpt Feature In Pro/engineer Wildfire 2.0
Using Warp's Sculpt Feature In Pro/engineer Wildfire 2.0
Warp was introduced in Pro/ENGINEER Wildfire to allow you to transform, deform and morph geometry in a more creative and flexible way. A series of tools in the feature provide different controls depending on the type of deformation required, and these can be applied to any type of geometry. Pro/ENGINEER Wildfire 2.0 introduced the Sculpt and Spine tools. This tip will explore Sculpt and explain how to use some of its nuances to your advantage.
Difficulty:
Pro/engineer Wildfire 2.0 Fundamentals Lesson 07 - Making Changes
Pro/engineer Wildfire 2.0 Fundamentals Lesson 07 - Making Changes
Lesson Objective: In this lesson, we will learn about Edit, Edit Definition and Edit References.
Difficulty:
Modelling A Wooden Toy Vehicle - Level 1:creating A Single Component Design
Modelling A Wooden Toy Vehicle - Level 1:creating A Single Component Design
This design exercise, using Pro/DESKTOP, develops a wooden toy vehicle, suitable for a young child, which has a passing resemblance to the vehicle, in which, a certain television personality (Postman Pat) delivers mail around the Yorkshire Dales. The toy consists of a wooden body made from a single piece if wood, four wooden wheels, which are on wooden axles, pass through holes in the body.
Difficulty:
How To Update The Drawing System Parameter &todays_date Before Printing
How To Update The Drawing System Parameter &todays_date Before Printing
How to Update the Drawing System Parameter &todays_date Before Printing.
Difficulty:
Lesson 19 - Dampers
Lesson 19 - Dampers
Lesson Objective: In this lesson, we will learn how to create a damper in Mechanism.
Difficulty:
Pro/mechanica Analysis - Inverted Slider -building The Structure Model
Pro/mechanica Analysis - Inverted Slider -building The Structure Model
In this tutorial, you will perform a finite element analysis on the driver linkage of the Inverted Slider Mechanism. You will learn how to define loads and constraints, run an analysis, and display the results. You will also learn how to perform sensitivity analyses and optimizations of design parameters.
Difficulty:
Top Down Design - Creating A Skeleton - Demo
Top Down Design - Creating A Skeleton - Demo
In this Segment you will create a Skeleton Part. You will add curves to this part to represent the basic driving design intent of the heater. More...
Difficulty:
Swept Blends
Swept Blends
In this tutorial, we will learn about Swept Blends. A swept blend is used when you must blend together several sections, but the path that the blend takes must follow a specific trajectory. It is sort of a combination between a general blend and a sweep feature.
Difficulty:
Basic Modifications - Edit (concept)
Basic Modifications - Edit (concept)
The Edit option allows you to change the dimension values which drive a selected feature. You can access Edit in two ways: by double-clicking on a feature (referred to as direct Edit) or by selecting the feature and choosing Edit from the RMB pop-up menu.
Difficulty:
Using A Template - Concept
Using A Template - Concept
When you create a new part you can use an existing Template. The Template defines standard data that you want all parts to contain.
Difficulty:
Design Optimization Using Pro/mechanica - Step 3 - Model Setup
Design Optimization Using Pro/mechanica - Step 3 - Model Setup
In Step 1 and 2 we have created a model of the flexure that we wish to optimize, now in Step 3 we need to prepare this model for the finite element analysis. Applications (from the tool bar) followed by Mechanica and Structure invokes the integrated mode of Pro/MECHANICA. Here we define everything necessary for the design optimization. Selecting Model lets us define the geometry to be analyzed.
Difficulty:
Pro/engineer Wildfire 3.0 Core Concepts
Pro/engineer Wildfire 3.0 Core Concepts
Pro/ENGINEER Wildfire 3.0 allows you to easily create 3D solid models, enabling you to visualize parts and assemblies with a realistic appearance. Based on material properties such as density, these models have mass, volume, surface area and other physical properties such as a center of gravity. More...
Difficulty:
Reverse Engineering Product Designs (rex) (free Video Replay)
Reverse Engineering Product Designs (rex) (free Video Replay)
An overview of the Reverse Engineering capabilities within Pro/ENGINEER presented and demontrated by PTC`s Product Manager.
Difficulty:
Pro/desktop An Introduction
Pro/desktop An Introduction
3D modelling software offers designers and manufacturers tools which make the transition from initial ideas to finished product faster, more accurate and of a higher quality. The use of 3D software in the context of modern manufacturing practice is outlined below.
Difficulty:
How To Manually Clean Up An Imported Drawing
How To Manually Clean Up An Imported Drawing
Now that you have completed the automatic cleanup of the imported drawing, you will notice that there are still some entities on the drawing that represent the leader lines, arrows, etc. that are represented as lines and arcs that have not been blanked. More...
Difficulty:
Total Tutorials in Category: 704